Casio G-SHOCK MASTER OF G-LAND MUDMASTER Digital-Analogue Men's Watch - GG1000-1A
SKU: GG1000-1A
Almost Gone
With the holiday season around the corner, we advise you that orders placed from 20 December 2024 to 5 January 2025 will be processed starting 6 January 2025. All of us at The Watch Factory extend our warmest wishes for a Merry Christmas and a Happy New Year to all our customers!
This is a Twin Sensor model from the G-Shock Mudmaster Series, designed for use in extreme environments scattered with rubble, dirt and debris. With a push of one large button at the 3 o'clock position, you can check your position with its Compass. The temperature can also be measured easily by pushing the button at 4 o'clock. This model has been developed with operability in mind so that anyone can intuitively check their position using the Compass, even in the most extreme climates, without visual observation. The dust and mud-resistant button guard cylinder structure prevents fine sand and mud from getting into the buttons while also helping to absorb any shock to the buttons and improving operability. Broad hour/minute hands and indices of large Arabic numerals have also been adopted to improve visibility. This design is packed with military-style flare, including a mode display that uses a sprocket-inspired disk dial and a textured band to prevent slipping.
Basic Information
Case size: 56.2 × 55.3 × 17.3 mm
Weight: 94 g
Case and bezel material: Resin / Stainless steel
Band: Resin Band
Construction:
Mud Resistant
Shock Resistant
Water resistance: 200-meter water resistance
Power supply and battery life
Approx. battery life: 2 years on SR927W X 2
Sensor feature
Digital compass (NORTH)
Hand indication of north (20 seconds continuous measurement)
Measures and displays direction as one of 16 points
Measuring range: 0 to 359°
Measuring unit: 1°
Bidirectional calibration
Magnetic declination correction
Bearing memory
Thermometer
Display range: -10 to 60℃ (14 to 140℉)
Display unit: 0.1℃ (0.2℉)
Watch Features
World time
31 time zones (48 cities + coordinated universal time), daylight saving on/off
Stopwatch
1/100-second stopwatch
Measuring capacity: 23:59'59.99''
Measuring modes: Elapsed time, split time, 1st-2nd place times
Timer
Countdown timer
Measuring unit: 1 second
Countdown range: 60 minutes
Countdown start time setting range: 1 minute to 60 minutes (1-minute increments)
Alarm/hourly time signal
5 daily alarms (with 1 snooze alarm)
Hourly time signal
Light
LED backlight (Super Illuminator)
Auto light switch, selectable illumination duration (1.5 seconds or 3 seconds), afterglow
Light colour
LED:White
Calendar
Full auto-calendar (to year 2099)
Mute feature
Button operation tone on/off
Battery display/alert
Low battery alert
Accuracy
Accuracy: ±15 seconds per month
Other features
12/24-hour format
Regular timekeeping:
Analog: 3 hands (hour, minute (hand moves every 10 seconds), second)
Digital: Hour, minute, second, pm, month, date, day
Warranty: 2 Year International Manufacturer's Warranty
What is Water Resistance?
Every watch is designed differently and the individual design of each watch determines how resistant to water pressure that watch is. You should always check the water resistance measure of a watch before using it, so you can decide when to wear it and when to take it off.
What is the ATM?
The ATM of a watch is short for Atmospheres and is a measure of the level of water pressure a watch is designed to withhold. A higher ATM means that a watch can withhold more water pressure, whilst a lower ATM mean that it was designed to withstand less pressure.
Metres: A Common Misconception
The ATM or water resistance of a watch can also be expressed as a number of metres, such as 10 metres. This does not mean that a watch can be taken 10 metres below sea level - although that is a common misconception. It is simply the number of times the pressure at sea level a watch can withstand without letting water in. For example, a watch with an ATM of 1 can withstand 10m of pressure, whilst a watch with an ATM of 5 can withstand 50m of pressure.
Using Your Watch in Water
The ATM of your watch will allow you to determine how and where you can use your watch. The ATM is usually engraved on the case-back of every watch. If you're having trouble finding it you may need to visit the watch manufacturer's website or contact them directly. You can use the chart below to guide you on using your watch in water. For example, if your watch has an ATM of 5, you can safely use it when you're washing hands and if it's raining outside, but you should not take it diving, swimming, bathing or showering.
Swimming, Bathing or Showering With Your Watch
The Watch Factory recommends purchasing a watch of at least 20ATM if you wish to wear your watch whilst swimming, bathing or showering. Wearing a watch with a lower ATM whilst swimming, bathing or showering may not always damage the watch, however we urge on the side of caution due to the delicate nature of watches.
Water Getting Into Your Watch
The internal mechanisms that keep your watch ticking are protected from water by the case, crown and seals that prevent water from getting in. Damage to any of these parts of your watch may void your watch's water resistance and cause moisture to get in. A common issue is when the crown has come loose and the seal has been damaged, which allows moisture to get in. If you believe that there is any damage to your watch, it is best to get it assessed by a watch maker who can check the water resistance is intact.
We currently provide shipping services to both Australia and New Zealand. For more details regarding our shipping policies, please refer to our dedicated 'Shipping Policy' page.
Products must be returned within 30 days of receiving your order. They should be in their original condition, unworn, unused, with all tags still attached, and in the original packaging. For more details, please refer to our return policy.
Found a better price? No worries! We’ve got you covered. For more information, please read our price match policy.
You may also like
More from All
Recently viewed