Carbon Core Guard structure
From G-SHOCK, the watch that is constantly testing new limits in timekeeping toughness, comes a new series with Carbon Core Guard structure, which takes toughness to a new level.
The case is made of fine resin that incorporates carbon fiber for light weight along with rigidity that is superior to that of resin. This material protects the internal module from shock-induced damage and deformation. The dual back cover protects the back surface against impact.
Button structure shock resistance has been improved, which eliminates the need for external button guards.
The face of the watch consists of a disk pointer and raised hour markers for a look of bold toughness.
This new standard bearer of the G-SHOCK lineup combines a new shock resistant structure with urban outdoor styling that reflects its toughness.
New shock-resistant structure for a new dimension of toughness.
A new level of toughness
Carbon Core Guard structure
A new carbon core guard structure protects the module by enclosing it in a carbon case made of fine resin embedded with carbon fibers for outstanding strength, crack resistance, and durability. The new shock resistant structure marks an important advance of G-SHOCK core technology, making this model the new standard bearer of the G-SHOCK lineup.
• Guard-less Button Structure
• Dual Back Cover
A tough design with urban outdoor styling.
Easily replaceable band
Slide Lever Type Bicolour Molded Band
Dynamic face action
A bold face design
Big front button
Easy reading even in the dark
Super Illuminator (high brightness double LED light)
Case size (L× W× H): 51.2 × 47 × 14.1 mm
Weight: 64 g
Case / bezel material: Carbon / Resin
Band: Resin Band
Carbon Core Guard structure
200-meter water resistance
Power supply and battery life
Approx. battery life: 3 years on SR726W X 2
31 time zones (48 cities + coordinated universal time), daylight saving on/off, Home city/World time city swapping
00'00''00~59'59''99 (for the first 60 minutes)
1:00'00~23:59'59 (after 60 minutes)
1/100 second (for the first 60 minutes)
1 second (after 60 minutes)
Measuring modes: Elapsed time, split time, 1st-2nd place times
Measuring unit: 1 second
Countdown range: 24 hours
Countdown start time setting range: 1 second to 24 hours (1-second increments, 1-minute increments and 1-hour increments)
Alarm/hourly time signal
5 daily alarms
Hourly time signal
Double LED light
LED light for the face (Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow)
LED backlight for the digital display (Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow)
Full auto-calendar (to year 2099)
Button operation tone on/off
Accuracy: ±15 seconds per month
Hand shift feature (Hands move out of the way to provide an unobstructed view of digital display contents.)
Analog: 2 hands (hour, minute (hand moves every 20 seconds)), 1 dial (mode)
Digital: Hour, minute, second, pm, month, date, day
What is Water Resistance?
Every watch is designed differently and the individual design of each watch determines how resistant to water pressure that watch is. You should always check the water resistance measure of a watch before using it, so you can decide when to wear it and when to take it off.
What is the ATM?
The ATM of a watch is short for Atmospheres and is a measure of the level of water pressure a watch is designed to withhold. A higher ATM means that a watch can withhold more water pressure, whilst a lower ATM mean that it was designed to withstand less pressure.
Metres: A Common Misconception
The ATM or water resistance of a watch can also be expressed as a number of metres, such as 10 metres. This does not mean that a watch can be taken 10 metres below sea level - although that is a common misconception. It is simply the number of times the pressure at sea level a watch can withstand without letting water in. For example, a watch with an ATM of 1 can withstand 10m of pressure, whilst a watch with an ATM of 5 can withstand 50m of pressure.
Using Your Watch in Water
The ATM of your watch will allow you to determine how and where you can use your watch. The ATM is usually engraved on the case-back of every watch. If you're having trouble finding it you may need to visit the watch manufacturer's website or contact them directly. You can use the chart below to guide you on using your watch in water. For example, if your watch has an ATM of 5, you can safely use it when you're washing hands and if it's raining outside, but you should not take it diving, swimming, bathing or showering.
Swimming, Bathing or Showering With Your Watch
The Watch Factory recommends purchasing a watch of at least 20ATM if you wish to wear your watch whilst swimming, bathing or showering. Wearing a watch with a lower ATM whilst swimming, bathing or showering may not always damage the watch, however we urge on the side of caution due to the delicate nature of watches.
Water Getting Into Your Watch
The internal mechanisms that keep your watch ticking are protected from water by the case, crown and seals that prevent water from getting in. Damage to any of these parts of your watch may void your watch's water resistance and cause moisture to get in. A common issue is when the crown has come loose and the seal has been damaged, which allows moisture to get in. If you believe that there is any damage to your watch, it is best to get it assessed by a watch maker who can check the water resistance is intact.
Products must be returned within 30 days of receiving your order. They should be in their original condition, unworn, unused, with all tags still attached, and in the original packaging. For more details, please refer to our return policy.